Pages

Monday, May 8, 2017

Best Practices for Performance for Concurrent Managers in E-Business Suite

Best Practices for Performance for Concurrent Managers in E-Business Suite


This Document contains 5 topics

1. Generic Tips

2. Transaction Manager (TM).

3. Parallel Concurrent Processing (PCP) Environment.

4. Tuning Output Post Processor (OPP).

5. Concurrent Processing Server Tuning.

Generic Tips

 1) Sleep Seconds -  is the number of seconds your Concurrent manager waits between checking the list of pending concurrent requests (concurrent requests waiting to be started). A manager only sleeps if there are no runnable jobs in the queue.
Tip: During peak time, when the number of requests submitted is expected to be high, Set the sleep time to a reasonable wait time(e.g. 30 seconds) dependent on the average run time and to prevent backlog. Otherwise set the sleep time to a high number (e.g. 2 minutes). This avoids constant polls to check  for new requests.

2) Increase the cache size (number of requests cached) to at least twice the number of target processes.
For example, if a manager's work shift has 1 target process and a cache value of 3, it will read three requests, and try to run those  three requests before reading any new requests

Tip: Enter a value of 1 when defining a manager that runs long, time-consuming jobs, and a value of 3 or 4 for managers that run small, quick jobs.
This is only guidance and a balance needs to struck in tuning the cache, so with fast jobs you need to cache to get enough work for a few minutes. With slow jobs, a small queue helps should you need to reprioritize requests.

4) To maximize throughput consider reducing the sleep time of the Conflict Resolution Manager (CRM).  The default value is 60 seconds. You can consider setting to 5 or 10 seconds.

5) Avoid enabling an excessive number of standard or specialized managers. It can degrade the performance due polling on queue tables (FND_CONCURRENT_REQUESTS...). You need to create specialized managers only if there is a real need.

6) Set the system profile option "Concurrent: Force Local Output File Mode" to "Yes" if required  . You need to apply Patch 7530490 for R12 (or) Patch 7834670 for 11i to get this profile.

Refer to Note 822368.1 - 'Purge Concurrent Request FNDCPPUR Does Not Delete Files From File System or Slow performance'.

Note:- The profile option "Concurrent: Force Local Output File Mode" is set to "No" by default. After applying the patch, set the profile option to YES will cause FNDCPPUR to always access files on the local file system, hence FNDCPPUR will remove the OS files faster.To enable this feature, All Concurrent Manager nodes must be able to access the output file location via the local filesystem.

7) Truncate the reports.log file in log directory.   Refer to Note 844976.1 for more details.

Truncation of file "reports.log" is a regular maintenance work of Application DBA. Make sure that reports log file size should not increase to its maximum limit of 2 GB. There is no purge program to truncate file "reports.log". This maintenance needs to be done manually and regularly depending on number of concurrent program which uses "reports.log". You can safely truncate "reports.log".

The "reports.log" file can be located under $APPLCSF/$APPLLOG.

8) Ensure "Purge Concurrent Request and/or Manager Data, FNDCPPUR,"  is run at regular intervals with "Entity" parameter as "ALL".  A high number of records in FND_CONCURRENT tables can degrade the performance.

Additionally, the following are very good methods to follow for optimizing the process:
Run the job in hours with low workload. Doing this after hours will lessen the contention on the tables from running against your daily processing.
To get the requests under control, run the FNDCPPUR program with Age=20 or Age=18 would be a good method. That means, all requests older than 18 or 20 days will be purged.
Once the requests are under control, run the FNDCPPUR program with Age=7 to maintain an efficient process. This would solely depend on the level of processing that is performed at your site

9) Ensure that the log/out files are removed from the locations shown below as you run "Purge Concurrent Request and/or Manager Data program".
 $APPLCSF/$APPLLOG
 $APPLCSF/$APPLOUT
In the event that it does not remove the log/out files, over a period of time it will slow down the performance.  Please refer to the following note which suggests the patch which fixes it.

Note 822368.1 - 'Purge Concurrent Request FNDCPPUR Does Not Delete Files From File System or Slow performance'.
Note 1616827.1  Managing Concurrent Manager Log and Out Directories

10) Defragment the tables periodically to reclaim unused space / improve performance.
FND_CONCURRENT_REQUESTS
FND_CONCURRENT_PROCESSES
FND_CRM_HISTORY
FND_ENV_CONTEXT
FND_TEMP_FILES
FND_CONFLICTS_DOMAIN

HOW TO DEFRAGMENT

10.1) alter table <owner>.<table_name> move;

10.2)Note that, some indexes might become unusable after table is moved, check the index status from dba_indexes for the table moved and rebuild them too as explained in next bullet.
select owner, index_name, status from dba_indexes
where table_owner = upper('&OWNER') and
table_name = upper('&SEGMENT_NAME');

10.3) alter index <owner>.<index_name> rebuild online;

Note:

Ensure Concurrent Manager is down before you defragment.

Ensure the tablespace in which the object currently exists has got sufficient space before you move/defragment.

Always take backup of the tables before moving the data. It is recommended to perform ths action on Test instance initially then test it thoroughly before performing it on Production instance.


10.4) You will need to re-collect the statistics for the tables.

For example:
exec fnd_stats.gather_table_stats ('APPLSYS','FND_CONCURRENT_REQUESTS',PERCENT=>99);

11) Ensure you upgraded to the latest code to avoid below known Performance , Availablity & Deadlock related issues issues.
Performance

12 ) Profile Concurrent:Wait for Available TM  -  Total time to wait for a TM before switchover to next available TM.  Consider setting this  to 1 (second).

13) Ensure enough TMs exist to service the incoming request load.

14) When the load is high, set the following profile to optimum values to achieve better results.PO: Approval Timeout Value  -  Total time for workflow call (When initiated from Forms) to time out.

15)  Set the sleep time on the Transaction Manager to a high number (e.g. 10 minutes), this avoids constant polls to check for shutdown requests.

Parallel Concurrent Processing (PCP) Environment

16) If the failover of managers is taking too long refer to Note 551895.1 - 'Failover Of Concurrent Manager Processes Takes More than 30 Minutes'.

17) To avoid known issues, apply Patch 15900099 (11i), Patch 15981173 (12.0 ), Patch 15981176 (12.1.3) along with pre-requisites , when you are in the process of implementing PCP. Also refer to Note 1389261.1.

18) Set profile option 'Concurrent: PCP Instance Check' to 'OFF' if instance-sensitive failover is not required. Setting it to 'ON' means that concurrent managers will fail over to a secondary application tier node if the database instance to which it is connected goes down.

19)Transaction Manager uses DBMS_PIPE to communicate with application session prior to 11i.ATG_PF.H RUP3. DBMS_PIPE in turn uses OS Pipe.We might use Advance Queue(AQ) with 11i.ATG_PF.H RUP3 by setting System Profile Concurrent: TM Transport Type to QUEUE.

Note  Pipes are more efficient but require a Transaction Manager to be running on each DB Instance (RAC). So you might want to use "Queue" for easy maintenance.

20) Add these parameters depends on your Database version

                + _lm_global_posts=TRUE
                + _immediate_commit_propagation=TRUE  (11g RAC)
                + max_commit_propagation_delay=0  (9i RAC)

21) To speed up the PCP Failover ,Tune the below parameters.
Kernel parameters (Find the analogous parameter for your platform)
tcp_keepalive_intvl
tcp_keepalive_probes
tcp_keepalive_time ( Do not set this value to low; since it will then use up your network resources with unnecessary traffic)

DCD (Dead connection detection); To setup update sqlnet.ora from the Database Tier.
sqlnet.expire_time

Set the environment Variable at Concurrent Manager Tier.
FDCPTRW

Check PMON Cycle & Sleep Intervals for ICM (internal Concurrent Manager) setup.
Navigation OAM -> SiteMap -> Monitoring -> Internal Concurrent Manager Link(Under Availability) -> "View Status" -> "Edit ICM Runtime Parameters"

Tune Failover Processes.
In the case of node failover, the maximum number of processes that the work shift can run simultaneously.

Nodes can become overloaded when a middle-tier node fails and service instances on that node failover to their secondary nodes. The Failover Processes value should be smaller than the normal Processes value, to lessen the impact on the existing resources allocated on a secondary node. When failover occurs, the ICM uses the Failover Processes value in place of the normal running processes value as it iterates through service instances to perform queue sizing.

Navigation System Administration > Concurrent Managers > Standard Manager > Edit > Failover Processes

System Administration > Concurrent Managers > Output Post Processor > Edit > Failover Processes

Enable Reviver.
What is FNDREVIVER and How Is It Set? Note 466752.1

Ensure Internal Monitor is up and running on all the PCP Nodes. Ensure it has a valid workshift.
Concurrent > Manager > Define > Query "Internal Monitor" > workshift

Note:- The sole job of an Internal Monitor Process is to monitor the Internal Concurrent Manager and to restart that manager should it fail. The first Internal Monitor Process to detect that the Internal Concurrent Manager has failed restarts that manager on its own node.


Tuning Output Post Processor (OPP)

In order to tune the OPP to improve performance refer the below Note. It discusses  How to monitor the workload of OPP and Suggests you how to tune Output Post Processor (OPP) to improve performance and avoid java.lang.OutOfMemoryError exception.

Note 1399454.1 - 'Tuning Output Post Processor (OPP) to Improve Performance'.

Concurrent Processing Server Tuning

1. Any Concurrent Processing (CP) server tuning or load balancing needs are to be addressed by Oracle Consulting. There are way too many site specific factors that needs to be considered for optimum CP throughput: from machine hardware, to user request volume, to required Work Shifts, to programs run time characteristics (long / short running)--not to mention also testing and benchmarking. Such a tasks, is beyond the scope of ATG Support.

ATG support would be glad to investigate a failing manager or program issue; however, CP performance issues due to increased concurrent request volume or due to a new installation needs to be addressed by Oracle Consulting.

2. The "Tuning Concurrent Processing" chapter of the white paper "A Holistic Approach To Performance Tuning Oracle Applications Systems Release 11 and 11i" Note 69565.1 may provide some basic insight. Also reference the "Defining Concurrent Managers" and the "Setting Up and Starting Concurrent Managers" chapters of the "Oracle Applications System Administrator's Guide - Configuration".

3. As per Note 69565.1 "A Holistic Approach to Performance Tuning Oracle Applications Systems", "50% of concurrent processing performance tuning is in the business!"

4. Visit the Concurrent Processing Product Information Center (PIC) Note 1304305.1 for additional performance and setup documentation.

No comments:

Post a Comment